Growatt SPH 10000TL‑HU‑US
10kW Split-Phase Hybrid Solar Inverter
Built for Serious Solar Installations
Every feature engineered for maximum flexibility — from residential rooftops to commercial arrays
15kW Solar Input, 3 MPPTs
Three independent MPPT trackers with 2 strings each handle up to 15,000W of PV panels — manage different roof orientations or shading zones independently for maximum yield.
Dual AC Inputs
Accepts power from both the utility grid and a generator simultaneously. Automatic source selection ensures your home always has power — even when the grid is down and it's cloudy.
Dual Battery Ports
Two independent battery ports support flexible configurations — parallel batteries for more capacity, or separate banks with different chemistries. Supports both lithium and lead-acid at 48V.
200A Charge / Discharge
Industry-leading 200A max charge and discharge current with CAN/RS485 communication means your battery charges faster and delivers full power when you need it most.
Split-Phase 120/240V
Pure sine wave split-phase output at 120/240V or 120/208V covers all US and Oman-compatible loads — from 120V appliances to 240V HVAC, well pumps, and heavy equipment.
LCD Touchscreen + App
Configure, monitor, and control the system from the built-in interactive LCD touchscreen or remotely via the Growatt ShinePhone app over WiFi or optional 4G.
AFCI + Full Protection
Arc Fault Circuit Interrupter, ground fault monitoring, anti-islanding, surge protection, insulation resistance monitoring, and residual-current monitoring — certified to UL 1741 SA/SB.
Stack Up to 6 Units
Connect up to 6 SPH 10000TL units in parallel for a total system power of 60kW — scale from a single home to a small commercial or industrial installation without changing your inverter.
Flexible Energy Solutions for Any Installation
From a single-family home to a small business, the SPH 10000TL adapts to your situation — grid-tied, off-grid, or hybrid. Switch between modes on the fly from the app without touching the hardware.
- Grid-tied: export surplus solar, draw from grid as needed
- Off-grid: operate entirely on solar + battery with no grid connection
- Hybrid: self-consume solar first, store surplus, draw from grid last
- Time-of-Use: charge battery at cheap off-peak rates, discharge at peak
- Generator support: accepts generator as second AC input source
Built for Broad Battery Compatibility
Designed to work with a wide range of 48V battery types — lithium (LFP, NMC) and lead-acid (AGM, Gel, Flooded). This gives you greater flexibility in system design, future upgrades, and storage expansion.
- 48V lithium (LFP / NMC) — CAN/RS485 BMS communication
- 48V lead-acid — AGM, Sealed, Gel, Flooded all supported
- Up to 200A charge / 200A discharge current
- Dual battery ports for expanded or split configurations
- Compatible with most popular battery brands in Oman
Protection Beyond the Basics
The SPH 10000TL is certified to UL 1741 SA/SB and IEEE 1547 — the most demanding safety standards for grid-tied solar inverters. Every scenario is covered:
- AFCI (Arc Fault Circuit Interrupter) — prevents electrical fires
- Ground fault monitoring with automatic shutdown
- Anti-islanding protection — grid disconnects safely in an outage
- Insulation resistance monitoring at startup
- Residual-current monitoring unit built-in
- Surge protection on PV, AC grid, and battery ports
- Overcurrent & overvoltage protection on all ports
5 Smart Operating Modes
Switch modes from the app — no rewiring required
Self-Consumption
Solar powers your home first. Surplus charges the battery. When solar isn't available, battery powers the home. Grid is the final fallback — maximises your free solar energy.
Time-of-Use Load Shifting
Charge your battery during cheap off-peak electricity hours, then discharge during peak tariff hours. Reduces your electricity bill even when solar generation is low.
Backup / UPS Mode
Prioritises keeping the battery full at all times. When grid fails, the inverter switches to battery in under 10ms — your critical loads keep running without interruption.
Grid-Tie Only
Export all solar generation to the grid (where net metering is available). No battery required. Earn credits on your electricity bill for every kWh you export.
Off-Grid
Operate completely independently from the utility grid — solar charges the battery, battery powers the home 24/7. Ideal for remote sites or grid-independent living.
Custom / Hybrid
Combine modes for your exact scenario — set charge/discharge schedules, reserve battery percentage for backup, define grid import limits, and more via the Growatt app.
Scale from 10kW to 60kW — Stack Up to 6 Units
Start with one unit for your home. As your energy needs grow, add more SPH 10000TL units in parallel — no additional infrastructure required.
| Max recommended PV power | 15,000W |
| Max input power (single MPPT) | 10,000W |
| Max DC voltage | 525V |
| Startup voltage | 130V |
| MPPT voltage range | 150V – 450V / 370V |
| Number of MPPT trackers | 3 |
| PV strings per tracker | 2 |
| Max input current per tracker | 22A |
| Max short-circuit current per tracker | 27A |
| AC inputs | 2 (Grid + Generator) |
| Nominal AC input power | 10,000W |
| Nominal input voltage | 240V |
| Nominal input current | 41.67A |
| Max grid passthrough current | 62.5A |
| Max generator input power | 10,000W |
| Nominal AC output power | 10,000W |
| Max AC apparent power | 10,000VA |
| Output waveform | Pure Sine Wave |
| Nominal output voltage | 120V/208V or 120V/240V Split-phase |
| Voltage range | 180V – 280Vac |
| Grid frequency range | 50Hz / 60Hz |
| Max output current | 50A |
| Power factor range | 0.8 leading to 0.8 lagging (adjustable) |
| Total harmonic distortion (THD) | <3% |
| Grid connection type | L1 / L2 / N / PE |
| Peak efficiency | 98.1% |
| CEC weighted efficiency | 97% |
| MPPT efficiency | ≥99.9% |
| Battery ports | 2 (dual battery port design) |
| Battery voltage range | 40V – 60V (48V system) |
| Max charge / discharge current | 200A / 200A |
| Continuous power | 10,000W |
| Communication protocol | CAN / RS485 |
| Compatible battery types | Lithium (LFP / NMC), Lead-acid (AGM / Sealed / Gel / Flooded) |
| Built-in battery breaker (battery side) | 80V / 250A |
| Nominal backup output power | 10,000W |
| Nominal output voltage | 120V/208V or 120V/240V Split-phase |
| Nominal output frequency | 50Hz / 60Hz |
| Grid-to-battery switch time | <10ms |
| Overload capability | 1.5× rated power for 5 seconds |
| Model | SPH 10000TL-HU-US |
| Topology | Transformerless |
| Cooling | Smart fan cooling |
| Self-consumption | <60W |
| Noise emission | ≤60 dB(A) |
| Dimensions (W × H × D) | 457 × 874 × 256mm (18.0 × 34.4 × 10.1 in) |
| Weight | 42.5kg / 93.7 lbs |
| Operating temperature | –25°C to +60°C (derating above 45°C) |
| Relative humidity | 0 – 100% |
| Altitude | Up to 2,000m |
| Protection degree | IP65 / NEMA 4 (outdoor rated) |
| Display | LCD with interactive touchscreen |
| Communication | RS485 / CAN / USB |
| Remote monitoring | WiFi (built-in) + 4G (optional) |
| App | Growatt ShinePhone (iOS & Android) |
| Max parallel units | 6 units (60kW total) |
| Certifications | UL1741, UL1741SA/SB, IEEE1547, CA Rule21, CSA C22.2, FCC Part15 Class B |
| Warranty | 10 Years (Growatt manufacturer warranty) |
| Battery side | 80V / 250A |
| Grid side | 400V / 100A |
| Generator side | 400V / 63A |
| Load side | 400V / 100A |
- ✓ 1× SPH 10000TL-HU-US Hybrid Solar Inverter
- ✓ 1× AC Grid Connection Cable
- ✓ 1× Battery Connection Cable
- ✓ 1× Communication Cable (RS485)
- ✓ 1× WiFi Module (pre-installed)
- ✓ 1× Mounting Bracket & Hardware
- ✓ 1× Quick Installation Guide
- ✓ 1× User Manual
- ✓ 1× Warranty Card (10-Year)
* Solar panels, batteries, mounting structure, and additional cabling are not included. Contact us for a complete system design.
Get a Free Solar System Design
Our engineers will size a complete hybrid solar system for your property — panels, inverter, battery, and EV charger — based on your actual consumption data and Oman's solar irradiance.
Request Free System Design